
Wavecom Fastrack M1306B gsm/gprs modem RS232 gprs pos
Product Description
Wireless TCP/IP GSM/GPRS modem M1306
Quad-Band Wireless GSM/GPRS modem with TCP/IP
850 900/1800/1900MHZ
Send and receive data, voice, e-mail, SMS
Industrial Wireless Quad-band RS232 GSM/GPRS MODEM
With TCP/IP protocol stack
850 900/1800/1900MHZ
3V SIM card slot
DB15 RS232 interface
RJ11 for phone
SIM Application Toolkit
Double tone multi-frequency function (DTMF)
Send and receive data, voice, e-mail, SMS
SIM Application Toolkit
Maximum transmitting speed 115.2KB/s
GPRS Class 10
Antenna with high sensitivity
Always on-line
Conform with ETSI GSM Phase2+ standard
Output Power
Class 42W @ 900MHz
Class 11W @ 1800MHz
Input voltage6V-36V DC
Input current1A-2A
Standby current: 56mA
Working current: 100-140mA
Working temperature -20 -+55
Storage temperature:-25 -+70
Overall dimensions: 73 x 54 x 25mm
Weight: 82g
Accessories: DB15 RS232 cable, antenna, 4-PIN power cable
Moudle introduction:
EGSM 900/1800MHz GSM Module.
Supports voice / data / fax / SMS (text and PDU mode) / GPRS Class 10.
OpenAT capable for embedded applications
Optional TCP/IP stack permitting direct UDP/TCP connectivityand POP3/SMTP/FTP services
60-pin board-to-board connector for power supply, serial communications, 3V SIM interface, audio, GPIOs, analogue-digital convertor and 5x5 keypad interface.
This document defines and specifies the WISMO QUIK Q24x6 Series, available
under two GSM/GPRS Cl10 bi band versions:
• Q2406A: EGSM/GPRS 900/1800 MHz version with 16 Mb of Flash
memory and 2 Mb of SRAM (16/2)
• Q2406B: EGSM/GPRS 900/1800 MHz version with 32 Mb of Flash
memory and 4 Mb of SRAM (32/4)
• Q2406D: EGSM/GPRS 900/1800 MHz version with 64 Mb of Flash
memory and 8 Mb of SRAM (64/8). This configuration will be available
for handset application and vertical application where UART2 is not
used.
• Q2406E: EGSM/GPRS 900/1800 MHz version with 64 Mb of Flash
memory and 4 Mb of SRAM (64/4). This configuration will be available
for handset application and vertical application where UART2 is not
used.
• Q2426A: EGSM/GPRS 850/1900 MHz version with 16 Mb of Flash
memory and 2 Mb of SRAM (16/2)
• Q2426B: EGSM/GPRS 850/1900 MHz version with 32 Mb of Flash
memory and 4 Mb of SRAM (32/4)
• Q2426D: EGSM/GPRS 850/1900 MHz version with 64 Mb of Flash
memory and 8 Mb of SRAM (64/8). This configuration will be available
for handset application and vertical application where UART2 is not
used.
• Q2426E: EGSM/GPRS 850/1900 MHz version with 64 Mb of Flash
memory and 4 Mb of SRAM (64/4). This configuration will be available
for handset application and vertical application where UART2 is not
used.
WISMO Quik Q24x6 is a self-contained E-GSM/GPRS 900/1800 or 850/1900 bi-
band module including the following features :
• 58.4 x 32.2 x 3.9 mm
• 2 Watts EGSM 900/GSM 850 radio section running under 3.6 Volts
• 1 Watt GSM1800/1900 radio section running under 3.6 Volts
• Digital section running under 2.8 Volts
• 3V SIM interface
• Real Time Clock with calendar
• Battery charger
• Echo Cancellation + noise reduction
• Full GSM or GSM/GPRS software stack
• Hardware GPRS class 10 capable
• Complete shielding
• Complete interfacing :
o Power supply
o Serial link
o Audio
o SIM card
o Keyboard
o LCD (not available with AT commands)