The Huawei E1762 (Optus E1762) 3.5G Cellular Modem is a easy-to-use USB modem. among Huawei's latest offerings is the E176. It builds on last year'sE170, upping the radio specification and adding a memory card slot. Like the Huawei E170, the E176 offers quad-band (850, 900, 1800 and 1900MHz) GSM/GPRS/Edge connectivity, but where the older unit could connect to HSDPA and HSUPA 3G networks on the 2100MHz band, the E176 adds support for the 900MHz bands for better round-the-world coverage.
The Huawei E1762 USB Stick modem connect your computer over the 3G broadband network with no wires or hassles so you can access the Web or to your email box at broadband speeds. with USB connects to your laptop or desktop at home, giving total plug-and-play simplicity. Its super fast, super small, and super simple!
The Huawei E1762 is the same as Huawei E176 and E176G but this E1762 Quad-band supported world widely HSDPA/UMTS 900/2100MHz.
Speed: Download up to 7.2 Mbps, Upload up to 5.76 Mbps upload.
|Memory||Micro SDHC slot.|
Size: 85 x 27 x 12mm..
|Supported Systems||Windows 2000, XP, Vista, 7, Mac OS X 10.5.6|
Huawei brand E1762 has different logos due to different operators in the world!
We will send the modems at radom in stock ,Hope you donot mind the logos much!
Thank you so much for your kind understanding!
Step 1: Choose Tools > Options to open the Options interface.
Step 2: Set Network Type to WCDMA only and click Apply. About one minute later, you can access 3G networks.
Step 3: If you still cannot access 3G networks after 3G only is selected, the APN may be incorrectly set. Contact the local carrier.
If the problem persists when the APN is correctly set and 3G only is selected, use a 3G mobile phone to test whether the local area is covered by 3G networks. If the 3G mobile phone cannot access 3G networks, you can infer that the problem must be related to the network.
To solve the problem, do as follows:
Step 1: When Standard Enhanced PCI to USB Host Controller in the device manager is disabled,the data card should be identified correctly. If the data card cannot be identified, the problemmay be caused by static electricity. In this case, shut down the PC, remove all power cables that are connected to the PC, and then wait five to ten minutes.
Step 2: If another USB device is connected to the PC at the same time, remove all USB devices,disconnect the E122 and then connect it again. If the E122 can be identified correctly, this problem may be caused by the power failure of the main board. If the problem persists, go to Step 3:and Step 4.
Step 3: Insert the E122 into other PCs to check whether the E122 can be identified correctly. If it can be identified correctly, disconnect the E122 and then connect it again, or restart the PC. If it is still identified as an unknown device in other PCs, contact the customer service personnel.
Step 4: Insert another USB device to check whether it can be identified correctly. If the USB device is also identified as an unknown device, the problem is caused by the hardware failure of the PC.In this case, replace the USB jack or repair the main board. If the E122 can be identified correctly, contact the customer service personnel.
To solve the problem, do as follows:
Step 1: Try another USB port of the PC.
This problem may be caused by hardware because the data card cannot be closely connectedto the USB port of the PC.
Step 2: In Device Manager, disable all universal serial bus controllers and then enable them; or uninstall all universal serial bus controllers and then scan the device.
Step 3: Restart the PC.
To install the Data Card manually, do as follows:
Step 1: Insert the Data Card and wait until the virtual drive is identified.
Step 2: Double-click My Computer.
Step 3: Click the green Mobile Partner icon.
Step 4: For a beta testing version, run setup.exe; for a non-beta testing version, run autorun.exe.
Note that running other .exe program may cause that the Data Card cannot work properly.Alternatively, you can right-click the mobile partner CD-ROM icon and then choose Autoplay to run the setup program automatically.The normal installation procedure is performed.
Step 5: Install the related software by following steps.
To enable the Windows XP/2K play function, do as follows:
Step 1: Choose Start > Run and type gpedit.msc in the Run box.The Group Policy Object Editor window is displayed.
Step 2: In the left pane, choose Local Computer Policy > Computer Configuration >Administrative Templates > System, and then under Setting, double-click Turn off Autoplay.
Step 3: Click the Setting tab, select the Not Configured or Disabled option, and then click OK to close the Group Policy Object Editor window.
Step 4: The Turn off Autoplay function also can be set in User Configuration. The difference is that the setting in Computer Configuration effects more widely than that in User Configuration.
To solve the problem, do as follows:
Step 1: First shut down and then restart the Mobile Partner and check whether the dial-up is successful. If devices still cannot be found, perform Step 2.
Step 2: Remove and re-insert the data card. Then, dial a number. If devices still cannot be found, perform Step 3.
Step 3: Restart the PC. If the problem persists, perform Step 4.
Step 4: Uninstall the MP. Restart the PC and re-install the MP.
Uninstall the mass storage in the device manager and scan the device manager.
To solve the problem, do as follows then:
Step 1: Check whether the drive is installed by following the normal installation procedure. If the drive is installed manually, ensure that autorun.exe is first program to be run. If the installation fails to meet the requirements, uninstall the Mobile Partner and reinstall the Mobile Partner and drive.
Step 2: If the drive is correctly installed, you can update the drive manually. If the drive is updated successfully, the PC system must be faulty. Run the antivirus program or clear the system.
Step 1: Change to another USB port
Step 2: Check USB cable is connected
Step 3: Please contact Operator or Distributor
The problem will appear when you use the software of present version in Windows 2000, because the operating system can't support hot plug. You can double click the shortcut icon of the Dashboard appears on the desktop.
Step 1: In Windows 2000, please install the SP4 path.
Step 2: Delete the "Vid_12d1&Pid_1003" in "Regedit", which is located:
Step 3: \\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\ Vid_12d1&Pid_1003
When sending messages, the USB Modem will separate the progress into N parts. Then the system will send messages one after another. That means, if one failed, all messages that after can not send any more. To know how many messages succeed in sending, you can look them up in outbox or, you can setup sending status report.
There is narrow chance to receive message when data flows on line. Only if cut off the data flow can you receive the message continuously. Furthermore, sometimes you can not open the web page or no data flows, however, you can go on logging on line when sending out all the messages.
At this time, the operating system does not successfully drive the USB Modem. Please connect the USB Modem to computer again, the operating system will auto detects and recognizes the USB Modem hardware.
Step 1: Be sure Data Service of your USIM card is activated. You may check with the Operator.
Step 2: Click "Connect" to make connection to internet.
Step 3: Make sure APN is correct.
No, with 3G the actual speed a customer will experience will depend on whether there is enough coverage at a particular location and will be affected by the number of people nearby using the service at the same time. The technology does deliver greater capacity meaning that more people in the same location at the same time can benefit from a superior experience.
Existing devices will be compatible in the HSDPA 7.2 area. The 3G Broadband Datacard will simply continue to work at 1.8Mbps speed instead of the enhanced HSDPA speed of 7.2Mbps. The older USB Modem supports a maximum speed of 3.6Mbps, so customers with these devices will enjoy faster data rates in HSDPA 7.2 areas, but not as fast as those using the latest USB Modem.
Currently, typical home broadband speeds are up to 8 Mbps, which is faster than 3G broadband, however the browsing experience is very similar. For the foreseeable future, fixed line broadband.
A. Global Data Roam by default is the only tariff with which you can roam. For all other tariffs, please call for information and to activate roaming
Payment & Shipment
1/ Payment must be made within 3 days of order.We accept Alipay here.
2/ We will ship to the default address in Alipay, if you don't inform us.
3/ To guarantee the shipping time and safety delivery, we are ONLY able to ship item to the countries listed below:
For deliveries to other countries, please contact us to confirm if we can delivery to your address!
----Via Air Mail: Generally 7-15 working days worldwide.
Once you purchase, please DON’T leave negative or neutral feedback if you haven’t received item in 30 days, because we need time to process and ship your order during this period!
4/ Due to stock status and time differences, we will choose to ship your item from our first available warehouse for fast delivery.
6/ In order to ensure you receive you order tax free upon import, we will declare it as a 'GIFT' with a lower value. This lower price does not reflect the total price you paid or the market value of the product and may not apply to countries with different tariff rules. Any import charges or fees are the buyer's responsibility.
1/ We provide 1 year warranty. If the item is defective, please notify us within 3 days of delivery.
2/ All items must be returned in their original condition, in order to qualify for a refund or exchange of goods.
3/ The buyer is responsible for all shipping costs incurred.
** We depond on our customer satisfaction to succeed. Therefore,please do leave us positive feedback if you are satisfy with our item and service!
** Please contact us before leaving any negative or neutral feedback. Our aim is to provide Top Level Customer Service, we will work with you to solve any problems.
Huawei e1750 3G Unlocked Wireless Hsdpa Modem Android System Support /FlyTouch 3/Zenithink ZT-180US$ 43.71 - US$ 49.66/piece
Unlocked Original Huawei E169 Hsupa 7.2M Support Antenna Connection And CEUS$ 43.61 - US$ 49.56/piece
Huawei E220 Usb 3G Modem 3.6Mbps For Android SystemUS$ 31.57 - US$ 35.88/piece
Unlocked Huawei K4505,21Mbps Downlink Dual band HSPA+/HSPA ModemUS$ 58.58 - US$ 66.88/piece
Unlocked Huawei Mobile Broadband HSPA USB Stick E1762 for Yes OptusUS$ 44.88 - US$ 56.88/piece
Unlocked Huawei E160 HSDPA 3G Modem USB BroadbandUS$ 38.35 - US$ 43.58/piece
Unlocked Brand Huawei E176 Tri-Band HSDPA Quad-Band HSUPA Modem Hsupa 7.2MUS$ 42.35 - US$ 49.82/piece
Unlocked Huawei E160 Modem 3G USB Wireless ModemUS$ 38.35 - US$ 43.58/piece