NEW Unlocked Huawei E583C 3G Portable HSDPA MIFI WIFI Wireless Modem Router 7.2Mbps

NEW Unlocked Huawei E583C 3G Portable HSDPA MIFI WIFI Wireless Modem Router 7.2Mbps
Price: US $252.40/ lot, 2 pieces / lot,$126.20/ piece|Processing Time: Ships out within 10 days
Unit Type: lot (2 pieces/lot)|Package Weight: 1.5kg|Package Size: 20cm x 10cm x 8cm

Detailed Information:

Unlocked Huawei Mobile Broadband HSPA USB Stick E1762 for Yes Optus

US$ 112.20 - US$ 129.58/lot
3 pieces / lot

Huawei e1750 3G Unlocked Wireless Hsdpa Modem Android System Support /FlyTouch 3/Zenithink ZT-180

US$ 36.84 - US$ 41.58/piece

Huawei E226 3G WIFI USB Modem HSDPA ESDPA EDGE 7.2Mbps Freeshipping

US$ 43.91 - US$ 49.89/piece

Huawei Vodafone K4505 WCDMA 3G 21.6M USB Stick

US$ 154.34 - US$ 165.00/lot
3 pieces / lot

1.The admin console allows you to change settings and monitor the status of the router from any device that has a web browser.
2.Now you can have Mobile Broadband with Wi-Fi and you won't even have to hunt for a hotspot
3.It works with anything that's Wi-Fi enabled, like a laptop or iPod touch, Apple iPad, mobile phones, Nintendo DS & Sony PSP.
4.You can connect upto 5 devices to it via wireless,and charge it while connected using usb.You can also use the modem on Windows, Mac & Linux based computers, laptops & Apple iPad (via wifi)
5.It's small enough to fit in your pocket, so your Wi-Fi can go wherever you go.
6.It has a built-in Micro SD card slot.
7.Can work with any mobile network worldwide that supports data.

NOTICEHuawei brand E583c has different logos due to different operators in the world!

We will send the modems at radom in stock ,Hope you donot mind the logos much!

Thank you so much for your kind understanding!

1*E583c wireless modem router

1*USB Cable


1*User manual


The Next-Generation Personal Mobile Wi-Fi Device!

The Huawei E583c is thestate of the artof Wireless internet Technology. with Huawei MiFi E583c mobile hotspot you can take your network to almost anywhere, any place with 3G network coverage, it will create a WiFi network with 10m radius without having to usb connction, just put you Sim Card inside the MiFi and all your laptop and desktop on the same network, the MiFi router makes you be able to connect with multiple devices to the network, and enjoy fast internet connection.
This new model is with the new web admin interface, you to do more such as changing the APN and profile settings, sending and receiving SMS, accessing files stored in the SD memory card and longer battery life by auto disconnecting when idle.

To access type into your browser once you have connected the modem via wifi. The admin console allows you to change settings and monitor the status of the router from any device that has a web browser. It allows you to use more like a real router with advanced features such as mac address filtering. Also allows change of settings on a Mac, iPad, or any device with a web browser.

Like all Huawei mobile broadband products, the E583C is a plug-and-play device, eliminating the hassle of installing any drivers to their laptops. Windows, Mac or Linux laptop users can enjoy high speed data transmission speeds of up to 5.76Mbps (uplink) and 7.2Mbps (downlink) through the networks of major Hong Kong 3.5G HSPA mobile broadband Internet service providers. This allows users to instantaneously upload or download music and video files. The E583C also has a built-in microSD memory card slot (maximum 32GB) that can serve as a USB memory stick. Business executives, particularly when working away from the office, as well as gadget lovers can now experience the excitement of on-the-go wireless internet.

Additional Information

Brand NameHuawei
UnlockedYes. ready to use with global services.
Network Bands
  • HSDPA / HSUPA / UMTS / WCDMA - 2100/1900/900 MHz,
  • EDGE / GPRS / GSM - 1900/1800/900/850 MHz.
  • WLAN IEEE 802.11b/g
  • WLAN 2.401GHz~2.482GHz..
Memory128MB Flash, 64MB MicroSD Slot (up to 32g)
InterfaceNew OLED screen
AntenaBuilt In Antenna +External Antenna Slot
  • Size 96mm x 57mm x 11.5mm.
  • Weight 90g (including the battery).
Supported SystemsWindows XP, Windows Vista, Windows 7, MAC OS 10.4 and above,
  • Support Global Positioning System (GPS).
  • Built-in DHCP Server, DNS RELAY and NAT.
  • Plug and play (PnP).
  • Personal computer/Smart card (PC/SC) Driver.
  • Sharing the micro SD card on WEB page!

Technical FAQs

1. Why can my data card only be used in 2G networks?

Step 1Choose Tools > Options to open the Options interface.

Step 2Set Network Type to WCDMA only and click Apply. one minute later, you can access 3G networks.

Step 3If you still cannot access 3G networks after 3G only is selected, the APN may be incorrectly set. Contact the local carrier.

If the problem persists when the APN is correctly set and 3G only is selected, use a 3G mobile phone to test whether the local area is covered by 3G networks. If the 3G mobile phone cannot access 3G networks, you can infer that the problem must be related to the network.

2. Why I find an unknown device in the device manager after inserting the Data Card?

To solve the problem, do as follows

Step 1When Standard Enhanced PCI to USB Host Controller in the device manager is disabled,the data card should be identified correctly. If the data card cannot be identified, the problemmay be caused by static electricity. In this case, shut down the PC, remove all power cables that are connected to the PC, and then wait five to ten minutes.

Step 2If another USB device is connected to the PC at the same time, remove all USB devices,disconnect the E122 and then connect it again. If the E122 can be identified correctly, this problem may be caused by the power failure of the main board. If the problem persists, go to Step 3and Step 4.

Step 3Insert the E122 into other PCs to check whether the E122 can be identified correctly. If it can be identified correctly, disconnect the E122 and then connect it again, or restart the PC. If it is still identified as an unknown device in other PCs, contact the customer service personnel.

Step 4Insert another USB device to check whether it can be identified correctly. If the USB device is also identified as an unknown device, the problem is caused by the hardware failure of the PC.In this case, replace the USB jack or repair the main board. If the E122 can be identified correctly, contact the customer service personnel.

3. Why cannot I find the corresponding data card in Device Manager after inserting the Data Card?

To solve the problem, do as follows

Step 1Try another USB port of the PC.

This problem may be caused by hardware because the data card cannot be closely connectedto the USB port of the PC.

Step 2In Device Manager, disable all universal serial bus controllers and then enable them; or uninstall all universal serial bus controllers and then scan the device.

Step 3Restart the PC.

4. In the case that automatic installation how can I install the Data Card manually?

To install the Data Card manually, do as follows

Step 1Insert the Data Card and wait until the virtual drive is identified.

Step 2Double-click My Computer.

Step 3Click the green Mobile Partner icon.

Step 4For a beta testing version, run setup.exe; for a non-beta testing version, run autorun.exe.

Note that running other .exe program may cause that the Data Card cannot work properly.Alternatively, you can right-click the mobile partner CD-ROM icon and then choose Autoplay to run the setup program automatically.The normal installation procedure is performed.

Step 5Install the related software by following steps.

5. How can I enable automatic installation?

To enable the Windows XP/2K play function, do as follows

Step 1Choose Start > Run and type gpedit.msc in the Run box.The Group Policy Object Editor window is displayed.

Step 2In the left pane, choose Local Computer Policy > Computer Configuration >Administrative Templates > System, and then under Setting, double-click Turn off Autoplay.

Step 3Click the Setting tab, select the Not Configured or Disabled option, and then click OK to close the Group Policy Object Editor window.

Step 4The Turn off Autoplay function also can be set in User Configuration. The difference is that the setting in Computer Configuration effects more widely than that in User Configuration.

6. Devices are normally identified in the device manager but cannot be found when the Mobile Partner is used for dial-up, or the dial-up fails due to other errors.

To solve the problem, do as follows

Step 1First shut down and then restart the Mobile Partner and check whether the dial-up is successful. If devices still cannot be found, perform Step 2.

Step 2Remove and re-insert the data card. Then, dial a number. If devices still cannot be found, perform Step 3.

Step 3Restart the PC. If the problem persists, perform Step 4.

Step 4Uninstall the MP. Restart the PC and re-install the MP.

7. After the data card is inserted, a yellow exclamation mark appears in the mass storage identification in the device manager.

Uninstall the mass storage in the device manager and scan the device manager.

To solve the problem, do as follows then

Step 1Check whether the drive is installed by following the normal installation procedure. If the drive is installed manually, ensure that autorun.exe is first program to be run. If the installation fails to meet the requirements, uninstall the Mobile Partner and reinstall the Mobile Partner and drive.

Step 2If the drive is correctly installed, you can update the drive manually. If the drive is updated successfully, the PC system must be faulty. Run the antivirus program or clear the system.

8. No new hardware is found when the USB Modem is connected to computer. What shall I do?

Step 1Change to another USB port

Step 2Check USB cable is connected

Step 3Please contact Operator or Distributor

9. After successful installation, the Dashboard (e.g. Starhub) can't auto run, but I connected the USB Modem to the computer again, it can run automatically. Why?

The problem will appear when you use the software of present version in Windows 2000, because the operating system can't support hot plug. You can double click the shortcut icon of the Dashboard appears on the desktop.

10. Dashboard (e.g. Starhub) has been installed. Why does Windows still shows "new hardware" when I connect the USB Modem to computer next time.

Step 1In Windows 2000, please install the SP4 path.

Step 2Delete the "Vid_12d1&Pid_1003" in "Regedit", which is located

Step 3\\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\ Vid_12d1&Pid_1003

Detailed Specifications:

Model Number: E583C|Certification: CE|Products Status: Stock|Transmission Rate: 2Mbps|Type: Wireless|Style: External|wirless Modem Type: WCDMA|Interface Type: USB|Brand Name: HUAWEI|Place of Origin: Guangdong China (Mainland)|2G Network: GSM 850 / 900 / 1800 / 1900|HSDPA/HSUPA/UMTS/WCDMA: 2100/900 MHz|OS: MAC OS 10.4 and above,|WiFi: 802.11.b/g: Support Support WLAN: 2.401GHz~2.482GHz..|Memory: up to 32GB|Interface: New OLED screen