Welcome to our shop!
1 portable size, easy carry
2 wireless 3G modem, easy use
3 high speed, 7.2Mbps Donwload, 5.76 Upload Speed
4 one E5 c work for severail device same time, Share your mobile broadband
5 long battery life, Battery powered
6 Best companion for Apple pad!
7 100% unlocked for network
8 Wifi Gateway Router E585
|Unlocked||Yes. ready to use with global services.|
|Data Speed||Download up to 7.2 Mbps, Upload up to 5.76 Mbps|
|Memory||Internal 128MB Flash. MicroSD Slot up to 32GB .|
|Supported Systems||Windows XP, Vista, 7, Mac OS Linux.|
1. Can connect with different wifi enabled device wirelessly anywhere and anytime:With your own mobile Wi-Fi connection (known as MiFi®) so you can connect different Wi-Fi enabled devices (such as mobile phone, laptop, tablet PC etc) at once and get fast internet speeds with no wires, no hassles and no need for a Wi-Fi hotspot. So it will help you fix the problem that some device can not support either external 3G or internal 3G;
2. Can connect with several devices at the same time: a couple of different devices can share one E5 at the same time, you set up a Wi-Fi network anywhere and anytime;
3. Easy to carry and Easy to use:The E5830 is really easy to use and fits in your pocket. Just turn on your wireless modem, switch on connection to the mobile broadband network, and select the Wi-Fi function.
4. long battery life: 1500mhabuild in lio battery enable it work over 4 hours and stand by over 100 hours;
5. microSD card slot on the left that enable the E5 acts as a card readerwhen it's connected to a PC via the mini-USB port on the bottom of the device
How to use
Just turn on your wireless modem, switch on connection to the mobile broadband network, and select the Wi-Fi function.
Then choose the Wi-Fi option on whichever device you’re using.
There's no need to load any software to get online using the Huawei E5830. The wireless modem gives you download speeds of up to 7.2Mbps (megabits per second)
and comes with a battery that lets you stay connected to the internet for up to 5 hours.
The E5830 also comes with onboard software that starts each time you connect it to a PC or laptop using the USB cable.
The software allows you to send and receive text messages and change settings for your Wi-Fi connection.
Step 1: Choose Tools > Options to open the Options interface.
Step 2: Set Network Type to WCDMA only and click Apply. About one minute later, you can access 3G networks.
Step 3: If you still cannot access 3G networks after 3G only is selected, the APN may be incorrectly set. Contact the local carrier.
If the problem persists when the APN is correctly set and 3G only is selected, use a 3G mobile phone to test whether the local area is covered by 3G networks. If the 3G mobile phone cannot access 3G networks, you can infer that the problem must be related to the network.
To solve the problem, do as follows:
Step 1: When Standard Enhanced PCI to USB Host Controller in the device manager is disabled,the data card should be identified correctly. If the data card cannot be identified, the problemmay be caused by static electricity. In this case, shut down the PC, remove all power cables that are connected to the PC, and then wait five to ten minutes.
Step 2: If another USB device is connected to the PC at the same time, remove all USB devices,disconnect the E122 and then connect it again. If the E122 can be identified correctly, this problem may be caused by the power failure of the main board. If the problem persists, go to Step 3:and Step 4.
Step 3: Insert the E122 into other PCs to check whether the E122 can be identified correctly. If it can be identified correctly, disconnect the E122 and then connect it again, or restart the PC. If it is still identified as an unknown device in other PCs, contact the customer service personnel.
Step 4: Insert another USB device to check whether it can be identified correctly. If the USB device is also identified as an unknown device, the problem is caused by the hardware failure of the PC.In this case, replace the USB jack or repair the main board. If the E122 can be identified correctly, contact the customer service personnel.
To solve the problem, do as follows:
Step 1: Try another USB port of the PC.
This problem may be caused by hardware because the data card cannot be closely connectedto the USB port of the PC.
Step 2: In Device Manager, disable all universal serial bus controllers and then enable them; or uninstall all universal serial bus controllers and then scan the device.
Step 3: Restart the PC.
To install the Data Card manually, do as follows:
Step 1: Insert the Data Card and wait until the virtual drive is identified.
Step 2: Double-click My Computer.
Step 3: Click the green Mobile Partner icon.
Step 4: For a beta testing version, run setup.exe; for a non-beta testing version, run autorun.exe.
Note that running other .exe program may cause that the Data Card cannot work properly.Alternatively, you can right-click the mobile partner CD-ROM icon and then choose Autoplay to run the setup program automatically.The normal installation procedure is performed.
Step 5: Install the related software by following steps.
To enable the Windows XP/2K play function, do as follows:
Step 1: Choose Start > Run and type gpedit.msc in the Run box.The Group Policy Object Editor window is displayed.
Step 2: In the left pane, choose Local Computer Policy > Computer Configuration >Administrative Templates > System, and then under Setting, double-click Turn off Autoplay.
Step 3: Click the Setting tab, select the Not Configured or Disabled option, and then click OK to close the Group Policy Object Editor window.
Step 4: The Turn off Autoplay function also can be set in User Configuration. The difference is that the setting in Computer Configuration effects more widely than that in User Configuration.
To solve the problem, do as follows:
Step 1: First shut down and then restart the Mobile Partner and check whether the dial-up is successful. If devices still cannot be found, perform Step 2.
Step 2: Remove and re-insert the data card. Then, dial a number. If devices still cannot be found, perform Step 3.
Step 3: Restart the PC. If the problem persists, perform Step 4.
Step 4: Uninstall the MP. Restart the PC and re-install the MP.
Uninstall the mass storage in the device manager and scan the device manager.
To solve the problem, do as follows then:
Step 1: Check whether the drive is installed by following the normal installation procedure. If the drive is installed manually, ensure that autorun.exe is first program to be run. If the installation fails to meet the requirements, uninstall the Mobile Partner and reinstall the Mobile Partner and drive.
Step 2: If the drive is correctly installed, you can update the drive manually. If the drive is updated successfully, the PC system must be faulty. Run the antivirus program or clear the system.
Step 1: Change to another USB port
Step 2: Check USB cable is connected
Step 3: Please contact Operator or Distributor
The problem will appear when you use the software of present version in Windows 2000, because the operating system can't support hot plug. You can double click the shortcut icon of the Dashboard appears on the desktop.
Step 1: In Windows 2000, please install the SP4 path.
Step 2: Delete the "Vid_12d1&Pid_1003" in "Regedit", which is located:
Step 3: \\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\ Vid_12d1&Pid_1003