Fiber optic media converter be used to Ethernet's electricity signal switch to photosignal's transmitter.Its feature is the media converter's RJ-45 interface can auto-identify with couple equipment port speed and pass autoconditioning working frequency to match with couple equipment port,the speed can adjust 10M 100M and 1000M.
• Fully complies with IEEE802.3 10Base-T,IEEE802.3u 100Base-TX, IEEE802.3ab
• 1000Base-TX , IEEE802.3z 1000Base-FX standard.
• 1~3 10/100/1000M auto-negotiation RJ45 port, support Auto MDI/MDIX.
• 1~2 1000Base-SX/LX SFP port( with SFP module).
• Auto-detection of half/full duplex transfer mode for TX port.
• Auto-negotiation of 10/100/1000Mbps rate and Auto-MDI/MDIX for TX port.
• Provide switch configuration of half/full duplex transfer mode for FX port.
• Extend fiber distance up to 220/550m for multi-mode fiber and 20~100km for single mode fiber.
• Indication light: PWR, FX Link/act, FX 1000M, TX 1000M, TX 10/100M, TX Link/act.
Technical paramter
No. | Paramter | Discription |
1 | Port Rate | 10/100M Auto Sensing |
2 | Cable type | UTP/ Multi-model optical cable |
3 | Transmitter Model | (Fast )Ethernet |
4 | Transmitter Type | 10/100M Full duplexer/Half-duplexer |
5 | MTBF | >3 years |
6 | BER | <IE-8 |
7 | Data Library | 1MBits |
8 | Power stability | 0.2mw/0c |
9 | Acceptable range of optical power | -8~~ -36 |
10 | Operating Temp. | 00c~700c |
11 | Storaging Temp. | -450c~~ 800c |
12 | MAX. Cureent | 800mA |
13 | Power Consumption | 2.5w |
14 | EMC | FCC Part15 |
15 | Power Supply | Internal: AC 90-250V,50Hz,12VDC,-48VDC |
16 | External:DC 5V1A | |
17 | Wavelenght | Tx 1310nm/ Rx 1310nm |
18 | Interface | SC(ST/FC Customized) |
Application
• apply to ready to rise to 10M extended enterprise network bandwidth 100M
• Telecommunications
• Local area network
• widely used for computer data transmission network to meet a variety of business needs
• Apply to the campus broadband network, broadcasting network and intelligent residential broadband fiber-to-floor fiber to the home data transfer
• With the switches and other computer network equipment can be combined to form-chain, star, ring-type network and other computer networks
Trouble shooting
1.Device is not matched. Please select the corresponding network device according to the transfer rate of the product (10Mbps or 100Mbps) when connected to other network devices (network card, hub, switch).
2. Line loss is excessive during the fiber wiring. Excessive loss in connector plug-in and fiber soldering welding, and excessive intermediate nodes may cause excessive loss rate or abnormal operation.
Explanation for LED indicatorlamp
LED indicator lamps serve as device monitoring and trouble display. The following is the explanation for each LED indicator lamp.
LED indicator lamp | Status | Explanation |
FX Link/Act | On | Connection status display for fiber link. ON indicates that Fiber link is in correct connection. |
Blink | Active status display of fiber link Blink indicates packet goes through Fx end. | |
TX Link/Act | On | Connection status display for electric link. ON indicates that electric link is in correct connection. |
Blink | Active status display of fiber link Blink indicates packet goes through Tx end. | |
FDX | On | Transceiver works in the full duplex mode. |
Off | Transceiver works in the half duplex mode. | |
PWR | On | Power is on and normal. |
FX | On | Transfer rate of optical interface is 100Mbps. |
TX | On | Transfer rate of electric interface is 100Mbps. |
Off | Rate of electric interface is 10Mbps |
Tips:
If your cargo weighs up to 20KG or above, or you need larger quantity, please contact us or email to us, we will provide you new packing specifications, then try our best to save some transport costs for you, and so that the product price can be of some benefit to you!
We are a large manufacturing enterprise groups in China, we sell through Alibaba, there is only purpose ,it is to better promote our products,
all our company products are shipped direct from the factory, please contact us , hope to establish long-term friendly and mutual cooperation relations between each other !
Payment:
We accept Alipay, Bank Transfer, and Western Union. If need further details, please feel free to contact us, Thanks!
Shipment:
We ship by EMS, DHL, UPS, TNT, Fedex, Hong Kong Post, and Singapore Post and so on at the first reasonable time.
* EMS usually takes about 6-13 days, more or less. If for remote region, it will be a little longer time; If for buyer?s customs reason, it will be a little longer time.
* DHL, UPS, TNT, FedEx usually takes about 4-6 days, more or less. If for remote region,I t will be a little longer time; If for buyer?s customs reason, it will be a little longer time.
* Hong Kong Post, Singapore Post usually takes about 11-25 days, more or less. If for remote region, it will be a little longer time; If for buyer?s customs reason, it will be a little longer time.
* We usually ship the buyer item as GIFT in a lower value, in order to avoid the buyer?s tax. However, the tax is determined by buyer customs not by us, different countries for different tax rate, so if any tax then the buyer should understand it.
* Due to the buyer reason including -refuse to sign for the package- or -refuse to pay the tax? or -buyer country post reason and so on, the buyer have to understand all the lose. We are responsible for keeping the goods leave China smoothly. Once the goods leave China then the buyer will be in charge of all the responsibility.
Warranty:
We provide 6-12 months warranty. If the item is defective, please notify us within 3 days of delivery. All items must be returned in their original condition, in order to qualify for a refund or exchange of goods. Items returned after 15 days of delivery are only eligible for repair. The buyer is responsible for all shipping cost. When buying, it means the buyer have given tacit consent to the policy. If further details, please feel free to contact us, we will work with you to reach win-win.