HOT FOIL STAMPING MACHINE TIPPER BRONZING PVC CARD+2 FREE FOIL PAPER 110/220V

HOT FOIL STAMPING MACHINE TIPPER BRONZING PVC CARD+2 FREE FOIL PAPER 110/220V
Price: US $245.00/ piece|Processing Time: Ships out within 3 days
Unit Type: piece|Package Weight: 7.0kg|Package Size: 1cm x 1cm x 1cm

Detailed Information:

Brand New

Hot Foil Stamping Machine Tipper For Credit Card

COME WITH 1 SILVER AND 1 GOLD ROLL

TWO FREE Foil Paper

stainless steel makes useful life longer

Top-quality can make useful lift twice longer than ordinary product

1 YEAR FACTORY WARRANTY



A necessary equipment at the end of the process of producing hot foil items.
This machine is major used for:
Printing or hot stamping your own design, logo, pattern or texts
on paper, leather, plastic, cloth, PVC cards, etc, with excellent hot foil stamping effect.

New Upgraded With

stainless steel

Top-quanlity vessel

useful life longer

1 FREE roller of foil

PASS ISO9001 quality certification

Brand new sealed in factory CARTON

This machine is major used for:


Printing or hot stamping your own design, logo, pattern or texts on paper, leather, plastic, cloth, PVC cards, etc, with excellent hot foil stamping effect.

Bronzing Machine

Specifications:

Power supply: 110V-240V / 50Hz - 60Hz

Power: 300W

Size: 26cm×16cm×34cm

Temperature control automatically:0-300?

Net weight: 7.5HG

Maximum stamping area: 60mm×90mm

Installation:

1.Handle installation: Take out the handle rod, then insert it in the installation hole of the rocker shaft, and finally tighten the fastening screw beside the handle rod to fix the handle.

2.Height travel adjustment: The height travel of the equipment has been adjusted according to the bronzed substances with a thickness of lower than 1 cm when ex-factory. Generally, the work travel is proper to be adjusted to the position of about 30mm, if some special situation needs to adjust the travel, the following operation procedures will be done for the adjustment: Loosen the beam fastening screw, rotate the height travel handle, and after finishing the adjustment, tighten the beam fastening screw. When the height is adjusted, the left and right balance of the plates must be noted, that is to say, the parallelism and the alignment of the heat transfer plate and the work plate. The fastening screw shall be tightened step by step, and the one-stop finish shall be avoided, otherwise, the parallelism of the heat transfer plate and the work plate is difficult to achieve, thus not getting the ideal bronzing effect.

Payment:

Shipping:

Guarantee:

Feedback:

Detailed Specifications:

Place of Origin: China (Mainland)|is_customized: Yes|Gross Power: 300W|Plate Type: Letterpress|Color & Page: Single Color|Condition: New|Usage: Card Printer|Automatic Grade: Semi-Automatic|Type: Rotogravure Printing Machine|condition: new|warranty: 1 year