UV Exposure Machine special on pad printer and hot stamping photopolymer plate
Application:
This series of exposing unit is capable of exposing steel plates and nyion plates.Here are some characteristics:
1) excellent outlook with strong and llght machine body.Users eyes and skin are protected by the closed metal case in preventing leakage of UV llght.
2) Once pumped to vacuum, the whole process of exposing can be finished automatically. Easy to use and able to increase productivity at the same time.
3
light source | max.exposure size | power | machine dimension | lamp power*amount | exposure duration | gross weight | packing dimension |
UV light | 260*210 mm | 220V or 110V 50/60Hz | 300*290* 75mm | 8W*6 | 0-5.5min | 5kg | 320*310*90mm |
) Model: LT-280S
Please check this sample:
Instruction:
Solar plate are made up of 3 layers:
1-A steel or plastic backing plate
-The light sensitive polymer layer that will form the impression.This is the layer that hardens where it is exposed to UV light.
-A cover film.This protect the plate and is removed before exposure.
Heres a brief overview of the process:
1. Remove the cover film.
2. The artwork,on overhead transparency film,is placed on top of the plate.During exposure,the black areas in the artwork block out the UV light and the plate underneath will remain soft,the clear areas will let UV light through and will harden the plate below.
3. Scrub the plate in warm water washes away the soft parts of the plate
4. Dry the plate and post-expose.