Free shipping holographic film for window shop display ,transparent grey and white color all are available

Free shipping holographic film for window shop display ,transparent grey and white color all are available
Price: US $127.94/ square meter|Bulk Price: US $127.94/piece 22% off(6 square meter or more)|Processing Time: Ships out within 3 days
Unit Type: square meter|Package Weight: 3.0kg|Package Size: 160cm x 9cm x 9cm

Detailed Information:

RichTech Projection film has high light transmittance and diffusion, making excellent color reappearance. It is very useful in displaying, advertisement for outdoor which makes your normal and colorless shop window into a dynamic and fantastic experience. RichTech Projection film also can be cut into any shapes as you like to make it alive and entertainment. RichTech Projection film makes your shopping window to be attractive among many competitors.

Features:

Attention:

The width of the Rear projection film is 1.5m, so we recommend you to buy it in the size of 1.5mx2m, 1.5mx3m, 1.5mx4m…

Structure of projection foil:

Paste method of holographic film projection

First Step: Clean the glass, check for glass cleaning solution of the watering can full of wet the glass surface, with a hard scraper, wiper alternately scraping clean the glass of water, if necessary, can also be used Daogua shovel shovel dirt adhesion, supplemented by special cleaning cloth around the glass, carefully cleaned repeatedly, until the clean and so far, the use of tools: watering can, water, scraping, special cloths, blade and so on.

Note:

1, the glass surface can not keep shoveling dirt, dust, lint, etc., or between the membrane and the glass will have little room to breathe the air and cause membrane damage, thus affecting the quality of projection and film projection film appearance.

2, the best to use distilled water, purified water, or filtered tap water after precipitation of cleaning solution to reconcile in order to avoid dust.

3, the installation site ready to make pollution prevention, to prevent the water dirty walls and so on.

The second step: the installation of the projector film

1, removing film positioning torn off protective film, will be installed the installation of liquid sprayed plastic surface and exposed to clean the glass surface, install the plastic surface of the membrane attached on the glass surface, and carefully move the projector floating membrane.

2, wiper and bubble film projector in place, should be immediately re-sprayed in the projection installation of liquid film surface, will tear off the protective film surface of a clean membrane surface to attach the projector once again to install spray liquid, the surface smooth, scraping with a professional tools and glass of water between the membrane and installation of liquid bubbles excluded, the first wiper to light, and then forced to cross a continuous wiper, the glass top of the best use of horizontal wiper, below the wiper on to the next intersection, or around the middle of the wiper, the use of tools: handles the soft scratch, water, scraping, watering and so on.

Note:

1, the active solution, in order to avoid air bubbles, detached quality.

2, the film process to have a clean work area, clean no dirt, to ensure the film clean.

3, according to the direction of ordered cross-wiper, left too much water and air bubbles will affect the film quality.

4, the plastic film surface can not touch any other place.

Third step: finishing film side, dealing with water-soaked film projector carefully check the edge of the glass with a scraper squeezed between the diaphragm and the remaining liquid and bubble film, and the edge of the blank holder in order to enhance the cohesive force of film will homogeneous film around the cut. Practical tools: knife cut film, hard scraper and so on.

Note: blank to avoid scratching the film surface, if necessary, non-woven wrap available hard-scraper.

Fourth step: check the whole film flat film deal with residual defects bubbles and water stains, and loose perspective of location, can be used with soft cloth bag rounded scraper scraper will bubble gently or hard drive out, to give glass and diaphragm stronger adhesion. Utility: hard scraper, watering, et

Outstanding Feature: Wide viewing angle

Other Features: Clear, vivid picture, easy to installation, used in shops, window displays, exhibitions, conference rooms, advertising display, banks, wedding photo studio, ticket center etc.

Size:4:3 (40",60",80",100")
16:9 (40",60",80",100", 120")

Detailed Specifications:

Place of Origin: Guangdong China (Mainland)|Brand Name: AUVI|Model Number: Rear T1|Material: Transparent polyester film|Style: Rear type|Max Height:: 1.524m|Max Length: 30m|max diagonal size: 120" 16:9|Light Transmission Rate: 83%|View Angle: 180°|Thickness: 250μm|Working Humidity: 0~100%|Working temperature: 0°C~60°C