Description
87A Vocal Microphone mic with bag in box
87A microphone is a professional-quality, handheld condenser
microphone for use in sound reinforcement, broadcasting, and studio
recording installations. Its supercardioid polar pattern provides
greate ejection of unwant sound sources, making it ideal for miking individual instruments in a multi-microphone setting or for
miking single sources in a reverberant or noisy environment.
An integral three-stage wind and pop filter protects against wind
and breath noise. Its built-in sho mount ruces stand and handling noise.
Features
Highly directional supercardioid pi up pattern
Controll low-frequency roll-off
Very low RF and magnetic hum susceptibility
Minimally fect by varying load impance
Built-in wind and pop filter
Transducer element sho mount
R construction for outstanding reliability
Field-usable over a wide range of temperature and humidity
conditions
A epts a wide variety of phantom power sources,
including DIN 45 596 voltages of 11 and 52 Vdc
Specifications
Cartri e Type
Condenser (electret bias)
50 to 20,000 Hz
Polar Pattern
Supercardioid
Output Impance
Rat at 150 ohms (100 ohms actual +/- 20%)
Recommend minimum load impance: 800 ohms
Sensitivity (at 1,000 Hz)
Open Circuit Voltage: -54.5dBV/pa(1.85mV)
(1 Pa = 94 dB SPL)
Clip Level (at 1,000 Hz)
1000 ohm Load: -6 dBV (0.5 V)
imum SPL (at 1,000 Hz)
140.5 dB (0.25% THD, 1000 ohm load)
Self-Noise (equivalent sound pressure level; measur with
true rms voltmeter)
24 dB typical, A-weight
26 dB typical, weight per DIN 45 405
Dynamic Range
116.5 dB (imum SPL to A-weight noise level)
Signal-to-Noise Ratio
70 dB at 94 dB SPL (IEC 651)*
*S/N ratio is difference between 94 dB SPL and product`s
equivalent self noise (SPL A-weight).
Polarity
Positive pressure on diaphragm produces positive voltage
on pin 2 relative to pin 3.
PowerPhantom Supply Requirement: 11 to 52 Vdc,
positive at both pins 2 and 3.
Cu ent Drain: 1.0 to 1.2 mA
Contor
Three-pin (XLR) professional audio.
Case
Aluminum construction with steel grille and satin bla finish.
Dimensions
See User Guide.
Net Weight
200 grams (7 oz)