Details:
wireless system uses a patented Audio Reference Companding technology, can produce an extremely clear sound beyond the limits of conventional wireless technology.
Automatically select the frequency
Automatic Transmitter Setup
In the 24 MHz bandwidth, there are 960 selectable frequencies
Removable 1 / 4 wavelength antenna
Microprocessor - controlled diversity reception
RF display LED
5 Volume Meter
Multi-function, backlit LCD
Low-power indicator light
Frequency and power lockout
Solid metal backplane
Volume control device is located in the rear
1 / 2 rack design
Parts with Rack
Used in a location other than placed in a rack of equipment skid shock absorber
XLR and 1 / 4 inch output
Scope of use under normal conditions
300m (900 feet)
Note: The actual range depends on RF signal absorption, reflection, and
The degree of interference
Audio Frequency Response (+ / - 2 dB)
Minimum: 45 Hz
Maximum: 15 kHz
(Overall system frequency depends on microphone element.)
Total Harmonic Distortion (reference + / - 38 kHz deviation, 1 kHz tone)
Typically 0.5%
Dynamic Range
> 100 dB A weighted
Temperature Range
-18 Degrees Celsius (0 degrees F) to +50 degrees Celsius (+122 degrees Fahrenheit)
NOTE: Battery characteristics may be limited to this temperature range
Transmitter Audio Polarity
Positive pressure on microphone diaphragm (or plug in the headphones WA302 End
Positive voltage) will pin 2 (as opposed to
Low-impedance output at pin 3) and high-impedance 1 / 4 inch output end of the first
To generate a positive voltage.
SLX1 pocket-type transmitter
Audio Input Level
Mic -10 dBV maximum gain position
0 dB gain position +10 dBV maximum
-10 DB gain position +20 dBV maximum
Gain adjustment range
30dB
Impedance
1 M?
RF Transmitter Output
A maximum of 50 mW (depending on the system where the country`s relevant laws and regulations)
Size
108 mm (high) x 64 mm (W) x 19 mm (depth) (4.25 x 2.50 x 0.75 inches)
Weight
81 g (3 ounces) (without batteries)
Shell
Molded ABS shell
Power Requirements
2 "AA" alkaline batteries or rechargeable batteries
Battery Life
"8 hours (alkaline batteries)
SLX2 Handheld Transmitter
Audio Input Level
-10 DB position +2 dBV maximum
0 dB position -8 dBV maximum
Gain adjustment range
10dB
RF Transmitter Output
A maximum of 50 mW (depending on the system where the country`s relevant laws and regulations)
Dimensions (including microphone head)
254 mm x 51 mm (diameter) (10 x 2 inches)
Weight
290 g (10.2 oz) (without batteries)
Shell
Molded PC / ABS handle and battery cover
Power Requirements
2 "AA" alkaline batteries or rechargeable batteries
Battery Life
"8 hours (alkaline batteries)
SLX4 Receiver
Size
42 mm (high) x 197 mm (W) x 134 mm (depth) (1.65 x 7.76 x 5.28 inches)
Weight
816 g (1 Pang 13 ounces)
Shell
Galvanized steel
Audio Output Level (Ref. + / - 38 kHz deviation, 1 kHz tone)
XLR connector (access? Load): -13 dBV
1 / 4 inch connector (Access 3000? Load): -2 dBV
Output Impedance
XLR connector: 200?
1 / 4 inch connector: 1k?
XLR output
Impedance Balance
Pin 1: Ground
Pin 2: (+)
Pin 3: (-)
Sensitivity
Typically 12 dB SINAD is -105 dBm when
Mirror-frequency rejection
"Is usually 70 dB
Power Requirements
150 mA when 12 - 18 Vdc (external power supply