microphone for use in sound reinforcement, broadcasting, and studio
recording installations. Its supercardioid polar pattern provides
greate ejection of unwant sound sources, making it ideal for miking individual instruments in a multi-microphone setting or for
miking single sources in a reverberant or noisy environment.
An integral three-stage wind and pop filter protects against wind
and breath noise. Its built-in sho mount ruces stand and handling noise.
Highly directional supercardioid pi up pattern
Controll low-frequency roll-off
Very low RF and magnetic hum susceptibility
Minimally fect by varying load impance
Built-in wind and pop filter
Transducer element sho mount
R construction for outstanding reliability
Field-usable over a wide range of temperature and humidity
A epts a wide variety of phantom power sources,
including DIN 45 596 voltages of 11 and 52 Vdc
Cartri e Type
Condenser (electret bias)
50 to 20,000 Hz
Rat at 150 ohms (100 ohms actual +/- 20%)
Recommend minimum load impance: 800 ohms
Sensitivity (at 1,000 Hz)
Open Circuit Voltage: -54.5dBV/pa(1.85mV)
(1 Pa = 94 dB SPL)
Clip Level (at 1,000 Hz)
1000 ohm Load: -6 dBV (0.5 V)
imum SPL (at 1,000 Hz)
140.5 dB (0.25% THD, 1000 ohm load)
Self-Noise (equivalent sound pressure level; measur with
true rms voltmeter)
24 dB typical, A-weight
26 dB typical, weight per DIN 45 405
116.5 dB (imum SPL to A-weight noise level)
70 dB at 94 dB SPL (IEC 651)*
*S/N ratio is difference between 94 dB SPL and product`s
equivalent self noise (SPL A-weight).
Positive pressure on diaphragm produces positive voltage
on pin 2 relative to pin 3.
PowerPhantom Supply Requirement: 11 to 52 Vdc,
positive at both pins 2 and 3.
Cu ent Drain: 1.0 to 1.2 mA
Three-pin (XLR) professional audio.
Aluminum construction with steel grille and satin bla finish.
See User Guide.
200 grams (7 oz)