Welcome to my store !
This is a high-quality headset . Please rest assured purchase . If you are interested in our project . Please contact me . We have more pictures and information you provide . Thank you for your visit .
The 98H premium cardioid condenser instrument microphone that clamps onto the bell of wind instruments or onto the rim of percussion instruments, and its transformerless preamplifier circuitry improves linearity across the full frequency range. The pickup pattern of the 98H provides high gain-before-feedback and excellent rejection of unwanted noise. Its high maximum sound pressure level (SPL) enables it to handle the extreme demands of brass, woodwind and percussion instruments.
The clip-on 98H instrument microphone.
The integrated gooseneck and ratcheting swivel joint allows the microphone to be easily positioned and secured, and an isolation shock-mount reduces the transmission of instrument "key noise" and other mechanical noise. A gooseneck angle brace is included to provide better retention of the microphone placement during more active performances.
Type: Condenser (electret bias)
Polar Pattern: Unidirectional (cardioid)
Frequency Response: 20 to 20,000 Hz
Output Impedance: 1200 ohms
Output Level (0 dB = 1 volt per Pascal): Open Circuit Voltage: -56.5 dB (1.5 mV)
Output Clipping Level (at 1kHz, THD < 1%): -9 dBV (0.35 V)
Maximum SPL: 143.5 dB
Dynamic Range: 112.5 dB
Signal-to-noise Ratio: 63 dB at 94 dB SPL (IEC 651)
Polarity: Positive pressure on microphone diaphragm produces positive voltage on pins 3 and 4 with respect to pin 1 (ground).
we hope that the majority of overseas buyers to establish long-term relationship.Stick to our purpose:best quality+best service+fast shipping to our every customers
We will ship all orders as “gift” and dear lower value to avoid or minimize your import tax.
1. We are committ to the satisfaction of our customers and strive to provide the highest level of customer service.
2. If you are satisfied with the purchase, please leave us a positive feback, and we will do the same to you.
3. If you are not satisfied, pls tell us know, we will try our best to resolve the problem.