Click to Enlarge | Click to Enlarge | Click to Enlarge |
Click to Enlarge | Click to Enlarge | Click to Enlarge |
Click to Enlarge | Click to Enlarge |
2000W Class A Power Delay Soft Start Board with Temperature Protection
Please select 220V or 110V, if there is no choice, we send 220V as default.
Description:
Introduction
1.For the CPI (A) or high-power amplifier, the maximum power of 2000W
2.Suppression amplifier boot transient inrush current, the power of the CPI (A) and high-power amplifier transformer, the load impedance ultra-low, and large power supply filter capacitance, resulting in the instantaneous current amplifier boot is too large, easy to damage the rectifier bridge and damage filter capacitor.
3.When the amplifier heat sink temperature exceeds 75 degrees, the board can immediately cut off power to the amplifier overheating. Until the heat sink temperature dropped to below 75 degrees, the amplifier before you can start, otherwise the amplifier cant be switched
Product Parameters
1.Voltage: 110V or 220V (can select 110V or 220V, but the factory default is 220V)
2.(According to the size of the input voltage of the PP + input voltage: input 220V, that is, the PP and
3.220V welded together, pay attention to the PP cant be connected to 110V and 220V)
4.Size: Width 78 × long 88 × 32 mm
Package List
1*2000W Class A Power Delay Soft Start Board with Temperature Protection
inkFrog Analytics