Amplifier Power soft-start delay Temperature protection board Amplifier Protection Board
Description:
1.PCB 1.6mm thick double-sided use of plates, 2.0 oz copper thickness, HASL whole process,
Guaranteed by the size of the current good performance.PCB top quality, first-class system
For the process.
2. for various Group A or high-power amplifier, the maximum power 2000W.
3. instant surge suppression power amplifier current, due to the CPI and the high-power amplifier
Transformer power, ultra-low load impedance and power supply filter capacitance very large,
Resulting in instantaneous power amplifier current, the rectifier bridge and damage easily damaged filter
Filter capacitor
4.When the amplifier heatsink temperature exceeds 75 degrees plate, the plate can be immediately cut off the power
Source, not to the amplifier overheating.Until the temperature dropped to 75 degrees below the radiator,
Amplifier before you can start, otherwise the amplifier can not be switched
Voltage: 220V (option 110V)
Plate Size: 78 * 87 * 32
NOTE:
(Based on the size of the input voltage, select the PP + input voltage, such as: input 220V, that is, PP and
220V welded together, pay attention to PP can not connect 110V and 220V) factory default is 220V
Packing list:
1 * Temperature protection board